Is Drive Pin 920-00 Available Separately for 5th wheel jack

Question

Question:

Can I buy just the Drive Pin 920-00 from etrailer?

asked by: Ray S

0

Expert Reply:

The Lead Jack Repair Kit # LG-146059 that contains the drive pin 920-00 that you referenced comes in a kit and isn't available as separate parts unfortunately. To get the replacement drive pin you will need to get the whole kit.

expert reply by: Jon G

0

click to enlarge

Answer 1

The #84 E-Z Lube Spindle #TRU74FR is the same size spindle uses on your Lippert Torsion Axle. The stub is 1-3/4" diameter and 4-1/4" long. You will need to compare this to the size used on your 2021 Forest River R-Pod 196 to determine if…

view full answer...

Answer 2

Hi Paul, you’re definitely on the right track here, and I can help you narrow this down with confidence. With your tandem 3,500 lb Dexter axles and 33 inch spacing, both the Dexter EZ Flex part #K71-652-00 and the Lippert Road Armor part #LC53CK are…

view full answer...

Answer 3

You can use leaf springs that are rated higher than the axle without any issues as long as they measure the correct measurement for your trailer. For example the 6-leaf double eye spring for 7,000 lb axles part #e64SR measures 24-7/8" eye to…

view full answer...

Answer 4

Hey Ian, great to hear from you again! The differences between the MORryde CRE3000 #MR87ZR and AllTrek 4000 #MR89DR that fit a 33" wheelbase is the height between the hanger and equalizer bolts, and the amount of travel the suspension style will…

view full answer...

Answer 5

We have lift kits for trailer that easily add 2 inches to the height of the trailer. For that you'd want the part #RR23QX and you'd be set. I attached a picture that shows how it installs to give you an idea. This would be the easiest…

view full answer...

Answer 6

Hi Brian! I would not try to repair a 14 year old AC. It is typically more cost effective to replace the system, and you may not even be able to get parts depending on what went wrong. R410A units have been phased out as of last year because of EPA…

view full answer...

Answer 7

Hey Jordan! Yes, the Global Link Vise Lock #295-000024, Global Link RV Entry Door Locking Latch #295-000019, and Replacement Cam Lock Cylinder #295-000005 can all use the same key. Just make sure you choose the keyed alike option for each one before…

view full answer...

Answer 8

Hi George, The Curt Replacement Lifting Nut part #C93NR is specifically designed for the Curt 28512 heavy-duty weld on jack so it will not work as a replacement for a Bulldog jack. Bulldog jack parts are typically model-specific so even if they look…

view full answer...

Answer 9

I linked the schematic diagram for Lead Jack Repair Kit #LG-146059 taken from the written instructions. The complete instructions will be sent to you in a separate link. The follow leg repair kit is part #LC146060 in case you need it.

view full answer...

Answer 10

You should need repair kit #LG-146059 for the lead leg and #LG-146060 for the follower leg. From the picture you sent in I was able to determine that you have a Venture landing gear set VMC900R.

view full answer...

Answer 11

Repair kit #LG-146059 contains 2 pins and the drive shaft all of which are for the top of the jack. To help I have included the written instructions below and also a diagram that points out the parts mentioned in the written instructions. The…

view full answer...

Answer 12

For your lead jack leg on your Lippert Venture Landing Gear VMC900R-327953, you will want to use the Lippert Venture Lead Leg Repair Kit for 5th Wheel RV Landing Gear #LC146059. As for a follow leg kit, you will want to use the Lippert Venture Follow…

view full answer...

Is Drive Pin 920-00 Available Separately for 5th wheel jack

Product Page this Question was Asked From

Continue Researching