What is Needed to Flat Tow a 2007 Hummer H3

Published 10/27/2011

Products Featured in This Question

Roadmaster Sterling All-Terrain Tow Bar - Non-Binding - RV Mount - 2" Hitch - 8,000 lbs

(167)

$1375.00

Roadmaster Crossbar-Style Base Plate Kit - Removable Arms

(2221)

$575.00

Question:

What type is recommended base plate, if any, braking system and tow bar to flat tow a 07 Hummer H3.

asked by: Glenn

Expert Reply:

For a base plate kit for your 2007 Hummer H3 I would recommend the Roadmaster XL Base Plate Kit # 2505-1. Next you will need a tow bar, I recommend the RoadMaster Sterling All Terrain Tow Bar # RM-576. This tow bar comes with wiring, safety cables and quick-disconnects. I attached installation instructions for you to check out also.

The next component you will need to flat tow the vehicle is lighting. There are actually several lighting methods depending on your needs and how often you will be towing the vehicle. I have included a link to our series of FAQ articles on flat towing, some of which cover choosing the best lighting for your needs.

And finally, most states now require a supplemental braking system on the vehicle being towed. The easiest to install and use is the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This unit activates the brakes on the vehicle being towed in proportion to how much the RV is braking. This is the safest type of braking action and it reduces wear and tear on the RV and towed vehicle brakes.

You will also want to check the vehicle owners manual for additional information on flat towing the vehicle. Some vehicles require an axle disconnect, drive line disconnect, transmission lube pump, or free wheeling hubs in order to be flat towed.

expert reply by: Jameson C