What Fuses Need to be Pulled to Flat Tow a 2017 Buick Envision

Published 10/03/2018

Products Featured in This Question

Roadmaster FuseMaster Fuse Bypass Switch for Towed Vehicles - (2) 20-Amp ATM Mini-Fuses

(357)

$113.97

Roadmaster 4-Diode Universal Wiring Kit for Towed Vehicles - 7-Way to 6-Way Coiled Adapter Cord

(3187)

$175.28

Question:

where are fuses 29 and 32 located on 2017 buick envision . i understand i have to pull them in order to flat tow behind rv. what dinghy harness do i need. thanks

asked by: Ron

Helpful Expert Reply:

The F29 (body control module 2) and F32 (body control module 1) are located in the instrument panel fuse block which is located in the passenger glove box. You are correct in that they will need to be pulled each time you flat-tow the vehicle. If you don't want to physically pull the fuses each time then you can install the Roadmaster FuseMaster Fuse Bypass Switch part # RM76512.

The most popular dinghy harness we have for a 2017 Buick Envision is the Roadmaster Diode 7-Wire to 6-Wire Flexo-Coil Wiring Kit part # RM-15267. This kit comes with four diodes, wiring connectors, 6-way trailer connector for the vehicle, and a coiled 6 to 7-way adapter to connect the toad to the motorhome. We use this kit very often as it performs really well and lasts equally as long.

I have attached a review video for you as well.

expert reply by: Conner L