What Is Needed to Safely Flat-Tow a 2000 Pontiac Grand Am  

Question:

Expert Reply:

When flat towing a vehicle, there are 5 main components that are needed. Starting with base plates, the 2000 Grand Am will need Roadmaster Base Plates # 194-3. To install this you will need moderate mechanical skills and aptitude. It is hard to say exactly a numerical value for how difficult it would be to install this product, but I am confident that if you have access to basic tools you could accomplish this install. I am going to send you the installation instructions for this product in a separate email for you to check out also.

The base plate kit provides a safe attachment point for a tow bar. When choosing a tow bar, you will need one that is compatible with EZ base plates. I recommend the Roadmaster Stowmaster Tow Bar, # RM-501. I have included a link to the installation details and a link to a video review for you to view. You can also use the Sterling tow bar, # RM-575, that you have referenced.

You will also need safety cables. I recommend Roadmaster Safety Cables, # RM-643. These are coiled so they will not drag on the ground. If you use the Sterling tow bar, it comes with safety cables.

The next component you will need to flat tow the vehicle is lighting. There are actually several lighting methods depending on your needs and how often you will be towing the vehicle. I have included a link to our series of FAQ articles on flat towing, some of which cover choosing the best lighting for your needs.

And finally, most states now require a supplemental braking system on the vehicle being towed. The easiest to install and use is the Roadmaster Even Brake Portable Proportional Braking System, # RM-9400. This unit activates the brakes on the vehicle being towed in proportion to how much the RV is braking. This is the safest type of braking action and it reduces wear and tear on the RV and towed vehicle brakes.

You will also want to check the vehicle owners manual for additional information on flat towing the vehicle. Some vehicles require an axle disconnect, drive line disconnect, transmission lube pump, or free wheeling hubs in order to be flat towed.

expert reply by: Jameson C

0