Spindle Recommendation for Fitting a Galvanized Hub on a Trailer
Updated 07/30/2018 | Published 07/29/2018
Products Featured in This Question
Question:
I am looking to determining axle / spindle size on my Magic Tile sbv1719w trailer. Net capacity @,800, total wideth 89, tire size ST205 / 7514C, DBF 72. Options are 1 1inch Spindle, 2 1 1/16inch Spindle, and 3 1 1/38-1 1/16inch Spindle Goal is to locate a galvanized trailer hub replacement.
asked by: Scott M
0
Expert Reply:
We have a 2,000 lb axle capacity hub that is galvanized as part # 8-258-50BTUC1. For a spindle that will fit this hub the part # TRU94FR would be what you'd need.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Square #84 Spindle for 3,500-lb Trailer Axles - 1-1/2" Wide
- Trailer Spindles
- Standard Spindle
- Without Flange
- L68149
- 1-1/2 Inch Diameter
- Square
- For 3500 lb Axle
- TruRyde
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Who Makes The Best Quality Trailer Bearings?
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Where to Measure on Trailer Spindles to Determine Replacement Hubs
- Q&A: Should Trailer Equalizers have Side to Side Movement When Installed
- Q&A: Weld-On Spindle for Trash Trailer Without Suspension
- Q&A: Recommended Replacement Square 1.5" Spindle for a Boat Trailer
- Q&A: Repair Kit for Fulton Gooseneck Coupler Head
- Article: Trailer Wiring Diagrams
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Most Popular Wheel Bearings
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Where to Position the Trailer Axle?
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Double-Eye Trailer Suspension System Review