Troubleshooting Trailer Wiring Blinkers that Do Not Work After Second Harness Install on Vehicle
Updated 07/11/2018 | Published 07/10/2018 >
Products Featured in This Question
Question:
I have a 2015 Sonata Hybrid Limited and I bought both the Curt and this Tekonsha wiring harness. I had the same issue only brake and running lights work on trailer. No turn signals. I tested everything and it all works but still no turn signals. It is weird that 2 different products would have the same issue.
asked by: Mike L
Expert Reply:
That makes me think that the problem is related to your tow vehicle and not the trailer wiring harness like the part # C56247. Have you check the turn signal fuses on your Sonata? Does the blinker seem to work fine on the vehicle? have you tried using a circuit tester like # PTW2993 to test the pins of the 4-way for voltage when blinkers are on?
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Q&A: Is There Replacement Flush Ball for Dometic 310 Toilet
- Q&A: Towing Capacity of 2016 Hyundai Sonata
- Q&A: Replacement Trailer Ramp Spring Options
- Q&A: Recommendation for Adding Third Axle To Trailer Suspension
- Q&A: Recommended Paint For Touching Up Blemishes On A Trailer Hitch Accessory
- Q&A: Plug In Tow Bar Wiring and Trailer Wiring Harness at the Same Time on a 2017 GMC Terrain


