Replacement Bearings and Bearing Buddy Protectors Compatible with Hub
Updated 07/05/2018 | Published 07/03/2018 >
Products Featured in This Question
Question:
Im trying to find bearing buddies that fit my boat trailer and have tried 1.78 which was way small and then 1.98 and where just barely too big is there a size just smaller than the 1.98? I also need to know how to find out the size of my bearings so I can get new ones. Can you please help??? Thank so much
asked by: Mark B
Expert Reply:
We have one bearing buddy in between those two sizes. It is the Bearing Buddy Bearing Protectors - Model 1810 - Chrome Plated # BB1810 which are 1.810 Inches.
To get replacement bearings, the easiest way to know what you need is to have you pull one hub and look at the inner and outer bearing. The number for each bearing is printed on the face of each bearing. If you can't find this, then you can use a digital caliper like # PTW80157 to get the precise measurement of your spindle diameter where the bearings ride. I've attached an article to assist.
With the bearing number or the measurement of your spindles, I can assist in getting you the replacement parts.
Product Page this Question was Asked From
Bearing Buddy Bearing Protectors - Model 1810 - Chrome Plated - Qty 2
- Trailer Bearings Races Seals Caps
- Caps
- Bearing Protector Grease Cap
- 1.81 Inch
- 3500 lbs Axle
- Bearing Buddy
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Replacement Actuator for an Older Atwood 85736
- Q&A: Need a Grease Seal With Inner Diameter of 1.845 Inches and Outer Diameter of 2.442 Inches
- Q&A: Which Bearing Buddy Would Fit in Hub Bore that is 1-7/8 inches
- Q&A: Rubber Mat Needed for a 7 foot x 20 foot Gooseneck Featherlite Stock Trailer
- Q&A: Ribbed Rubber Mats for Floor of Horse Trailer
- Q&A: What Direction Should the Caliper Mounting Bracket Face on Kodiak Disc Brake Assembly, # K1HR35D
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Bearing Buddy Available for Hub Bore that Measures 1-7/8 inches
- Article: How to Measure for Trailer Hitch Drop
- Article: Most Popular Wheel Bearings
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: How to Measure a Trailer Axle
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub




