Recommended In-Vehicle Battery Charger for House Battery on Ford Transit
Updated 06/19/2018 | Published 06/16/2018 >
Products Featured in This Question
Question:
I think Im starting to understand...maybe. I have a ford transit 150 and want to have a house battery. No solar panels. If I use the redarc smart battery isolator, it wont charge to 100?? So I should use the Redarc In-Vehicle BCDC Battery Charger - Dual Input - DC to DC - 12V/24V - 25 Amp or the CTEK D250S?????? Which one will do the job better??
asked by: David P
Helpful Expert Reply:
The Redarc Smart Start Battery Isolator # 331-SBI212D referenced in your question will install between your Ford Transit's start battery and house battery. This will essentially pull power from either battery in an effort to keep both charged. It can potentially charge the house battery to 100%, but this is dependent on the start battery being completely charged as well, which likely won't be the case for the most part. This particular product isn't so much a standard battery charger, but simply an isolator that will transfer power from one to the other, and vice versa.
In order to ensure full charge on your house battery, I do recommend going with the Redarc In-Vehicle BCDC Battery Charger # 331-BCDC1240D that you also referenced. What this will do is is basically amplify the charge that the Transit's start battery is receiving from its alternator and use it to charge the house battery (as opposed to simply removing power from this battery and applying it to the second). Solar panels can be added so that you can have power off the grid, but they aren't necessary for it to perform well. The built-in battery isolator on this unit will also prevent the charger from pulling power from the start battery when the vehicle is off. I recommend adding the Fuse Kit # 331-FK60.
I have attached a short video demonstration on this charger, along with its written instruction manual that you can also look through.
Product Page this Question was Asked From
Redarc Smart Start Battery Isolator - Dual Sensing - 12 Volt - 200 Amp
- Battery Charger
- Battery Isolators
- 12V
- Maintains Only
- Vehicle Battery to Auxiliary Battery
- Redarc
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Replacement RV Toilet for Keystone Montana to Replace Dometic 310
- Q&A: Does Go Power Pure Sine Wave Inverter Charger Include Display
- Q&A: Remote for 2,000 Watt Go Power Industrial Inverter
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Q&A: Replacement Manual Lift Operator for Maxxair Vent Part Number MA00-04401M
- Q&A: How To Install Manual Lift MA10-20281K-3CF Replacement Part On MaxxAir Roof Vent
- Q&A: Installation of MaxxAir Replacement Lift Operator
- Q&A: Adding 7 Way to 2018 Jeep Renegade with existing 4 Way Wiring
- Article: Can You Flat Tow a 2025 Chevy Tahoe?
- Article: Determining Trailer Tongue Weight
- Article: 4 Steps to Choosing Your 5th Wheel Pin Box
- Article: How to Choose the Right Trailer Hitch Class
- Article: How to Charge a Trailer Battery While Driving: 3 Common Problems (And How to Fix Them)
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer


