Replacement Head and Shank for a Weight Distribution System

Published 06/05/2018

Products Featured in This Question

2-5/16" Hitch Ball - 1-1/4" Diameter x 2-3/4" Long Shank - Chrome - 12,000 lbs

(2640)

$23.42

Question:

Here are the photo's.

asked by: Jared

Expert Reply:

It sounds like you are looking for the head and shank to a weight distribution system. If this is the case then we have several for you to choose from. However, they are not universal so I would need to know which system you have in order to make sure you get the correct replacement.

If there are any part numbers on the spring bars or frame brackets then please send them to me but if not, a photo of the unit would also be very helpful. I have also attached our list of replacement weight distribution heads and shanks for you. If you remember what it looks like then you can search through this selection but if not, I should be able to make you get the correct replacement with either a photo and or part number.

expert reply by: Conner L

click to enlarge

Jared

6/5/2018

Here are the photo's.

Conner L.

6/5/2018

Thanks for the photo's! I sent these to my contact at Reese and they informed me that the correct replacement head and shank assembly for you is the Replacement Head and Shank for Reese Weight Distribution Systems part # RP54980. You can use part # 19286 for the hitch ball.