Is Fulton F2 Trailer Jack # F1413250334 Appropiate for A-Frame Car Hauler

Updated 05/22/2018 | Published 05/21/2018

Products Featured in This Question

Fulton F2 Adjustable A-Frame Jack - Sidewind - 9" Lift - 2,000 lbs

(12)

$173.58

Wide-Track Wheel Assembly for Fulton F2 Adjustable A-Frame Jack - 8" Diameter - 1,600 lbs

(11)

$139.87

Question:

I have a car trailer with an A-frame jack. According to fulton , I need a f2 A frame jack 1413250334 and the wheel is 500265. Can you tell me if this is correct and how much can you sell me one for?

asked by: Todd A

Expert Reply:

I can't answer that for certain without the weight of your trailer or dimensions of your current jack but it sounds appropriate. You need a jack rated high enough to hold the trailer when it's loaded and the 2,000 pound rated Fulton F2, part # F1413250334, with the wheel, part # F500266, is probably enough. You only need the jack to hold the trailer's tongue weight which is likely fairly high when loaded by not too high for this setup. Since the wheel is rated lower than the jack your lift capacity is limited by it at 1,600 pounds.

If your loaded tongue weight is higher, or considerably lower, let me know and I'll make a more specific recommendation. You should also compare the F2's lift of 9 inches to your current jack's lift to see how similar they are.

expert reply by: Charles S