Curt E16 5th Wheel Hitch and Base Rail Compatibility with 2017 Ford F150 5-1/2 Foot Bed

Published 05/21/2018

Products Featured in This Question

Curt E16 5th Wheel Trailer Hitch w/ Rails and Universal Installation Kit - Slide Bar Jaw - 16K

(607)

$512.83

Curt E16 5th Wheel Trailer Hitch - Slide Bar Jaw - 16,000 lbs

(607)

$375.61

Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches

(39)

$392.60

Sidewinder Wedge Kit for Curt E-Series Fifth Wheel Trailer Hitches

(53)

$50.62

Question:

Does it matter what sidewinder I get

asked by: Jessica W

Expert Reply:

The Curt E16 5th Wheel Trailer Hitch # C16115 will fit the industry standard base rails compatible with your 2017 Ford F-150. If you don't have the base rails yet, then I recommend the Reese Quick-Install Custom Installation Kit w/ Base Rails for 5th Wheel Trailer Hitches # RP50087-58 confirmed to fit your truck. These brackets won't require drilling into your truck frame.

If you want to use the kit # C16116, it will work with your truck, but you will need to drill into your frame for the correct fit and it will take about twice as long to install the brackets for the base rails. This is a great option if you are mechanically inclined to do the work yourself and save some money, but if you have a shop do the work, you may end up in the same cost range based on labor expenses.

With the 5.5 foot bed, you will need to use a Sidewinder pin box to get the correct turning clearances to prevent damage to your truck or trailer. I recommend using the custom wedge # RP64FR with this hitch for the best fit with a Sidewinder. I've linked the page to your Sidewinder options to assist.

expert reply by: Jason S

Jessica

5/21/2018

Does it matter what sidewinder I get

Jason S.

5/21/2018

Yes, Sidewinder pin boxes are specific to fit the model of pin box currently on your trailer. I've attached a couple articles to assist. If you have difficulty determining what pin box you have, as the number should be printed right on your pin box, then there are measurements that can be taken to confirm a fit. Other than the measurements, you just want to make sure the capacity of the Sidewinder is appropriate for your trailer's gross vehicle weight. If you need further help, I'd be happy to as long as you can give me your trailer year/make/model. A pin box number would be ideal or measurements. Please see attached articles.