Why Would Trailer Interior Lights Not Work with Breakaway System Installed
Updated 05/10/2018 | Published 05/09/2018 >
Question:
The Interior cargo lights do not work when the Hopkins breakaway battery charger is wired into the trailer. The breakaway charger is new and the battery is fully charged. When I bypass the breakaway charger, the interior cargo lights work. The trailer breakaway tested good.
asked by: George
0
Expert Reply:
Sounds like you have the 12 volt power circuit of your trailer either running to only your breakaway battery or only the trailer lights. Most likely the issue is the connection that you are making from the battery to the 12 volt system. Make sure that the connection is solid and allows both circuits to be active.
expert reply by:
Jameson C
0
Featured Help Information
Miscellaneous Media
Continue Researching
- Search Results: trailer breakaway kit
- Shop: Dexter Electric Trailer Brakes - 10" - Left/Right Hand Assemblies - 3.5K
- Shop: Dexter Trailer Hub & Drum Assembly for 3,500-lb Axles - 10" Diameter - 5 on 4-1/2 - Pre-Greased
- Search Results: dexter 8 247
- Shop: Dexter Trailer Axle Beam with Standard Spindles - 89" Long - 3,500 lbs
- Q&A: Pulling Breakaway Switch Pin Causes Battery Box to Burn and Melt and Running Lights Stay On
- Q&A: When do You Need a Breakaway Battery Charger and How Does it Function
- Video: Hands-On with the Curt Soft Trac II Trailer Breakaway Kit with Battery Charger
- Video: Review of Bright Way Trailer Breakaway Kit - Kit with Charger - 3802346
- Video: Curt Soft Trac II Trailer Breakaway Kit Feature Review
- Shop: Brake Controller
- Shop: Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control - 10,000 lbs
- Shop: Replacement Head for Curt MV Weight Distribution Systems
- Shop: Replacement Head for Curt TruTrack Weight Distribution System w/ Sway Control - 15,000 lbs
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Shop: Bright Way Trailer Breakaway Kit with Charger, LED Tester, and 5 Ah Battery - Side Load
- Q&A: Instructions to Wire a Trailer for Electric Brakes
- Q&A: How to Determine if Trailer has 84 Spindle to Pick Out Replacement
- Search Results: 5 on 45 idler hub
- Q&A: What Gauge Wire Should be Used When Installing Brake Assemblies on a Trailer
- Q&A: Gauge Wire Recommendation for Wiring up Trailer Brakes
- Q&A: Recommended Wire Gauge for Wiring Trailer Brakes
- Article: Trailer Drum Brakes vs. Disc Brakes: Making the Decision
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Shop: Trailer Wiring
- Video: An In-Depth Look at the Wiring Kit for Hydrastar Electric Over Hydraulic Actuators
- Video: Review of Deutsche Hydrapro Trailer Breakaway Kit - Trailer Breakaway Kit - DH84FR
- Search Results: 7 way to 7 way extension
- Search Results: 7~way connector
- Search Results: electric over hydraulic trailer breakaway kit

