Best Trailer Wiring Harness for a 2013 Chrysler Town and Country
Updated 05/02/2018 | Published 04/30/2018 >
Products Featured in This Question
Question:
In May 2014 I purchased a receiver and CURT t-connector for my 2013 Chrysler Town and Country. I believe either you or CURT replaced the T-connector in 2016 because it failed. Today the fuse for the left rear taillight was blown and also a replacement fuse. I removed the CURT T-Con and that corrected the problem fuse didnt blow. Is this a known problem with the CURT product no. 56150? Should I try another one or just try a different manufacturer? Should I contact CURT directly? Thanks in advance.
asked by: Charlie
Expert Reply:
I cannot speak specifically to the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector part # C56331 however, in our experience we have indeed had customers who experienced excessive problems with their Curt wiring harnesses whether that be a short in the wiring or failed converter box. What we have found is that the best manufacturer for wiring harnesses in regard to quality and longevity is Tekonsha. If you would like the Correct Tekonsha harness for your vehicle, then I highly recommend the Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # C56331.
If you need a refresher on how to install the harness, then you can take a look at the attached install video.
Product Page this Question was Asked From
Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- CURT
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: How to Determine the Correct Replacement Wiper Seal For an RV Slide-Out
- Q&A: Recommended Trailer Hitch and Towing Capacity for 2018 Dodge Grand Caravan
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: Air Force One Air Jumper Kit For Spartan K2 Chassis.
- Article: Trailer Wiring Diagrams
- Q&A: Why Should I Run the Trailer Power Wire Directly to My Battery Instead of a Vehicle Power Source?
- Q&A: Replacement Lower Section Recommendation for WFCO 8955 to be Lithium Compatible
- Q&A: How Much Clearance Is Lost When Switching To A Gen-Y Gooseneck Pin Box
- Article: 5th Wheel Hitch Installation | The Ultimate DIY Guide
- Q&A: Wiring Diagram For the Replacement Single Zone Thermostat for Dometic RV ACs
- Article: Best Bike Racks for Electric Bikes
- Article: How to Choose the Right Trailer Hitch Class
- Article: Brake Controller Installation: Starting from Scratch
- Article: Ball Mount Basics: Weight Capacity, Class, and Size



