Availability of Chest Style Tool Boxes to Fit Truck Bed Underneath Tonneau Cover

Question

Question:

Does this come any color than black? Do you have other similar boxes that fit under tonneau cover?

asked by: Ron

0

Expert Reply:

We only carry the black version of the DeeZee toolbox you mentioned part # DZ8560WB. We have a smaller aluminum version part # DZ8546 but it's only 8 feet of cubic storage. This might be enough for you though since you didn't mention the amount of space you'd need.

I attached a picture of this cargo box underneath a tonneau cover for you to check out as well.

expert reply by: Jameson C

0

click to enlarge

Answer 1

I spoke with my contact at DeeZee about your 2000 Chevrolet Silverado Truck With the stepside. We do not have a crossover toolbox that would fit your truck but we do have other options. I recommend the DeeZee Toolbox, part #DZ8546. this is a chest…

view full answer...

Answer 2

60 inches is the length of the box including the lip around the lid of the DeeZee #DZ8560WB that you referenced. The lower portion is exactly 59-1/2 inches wide.

view full answer...

Answer 3

It sounds like you would like to mount the Andersen Ultimate 5th Wheel Hitch with the gooseneck mount in your 2022 Ram 3500 with the OEM prep package. The Curt Ball and Safety Chain Loop Kit for Ram Underbed Gooseneck Hitch - 38K #C58CR is designed…

view full answer...

Answer 4

How tall are the bed rails of your truck from the bed floor to the top of the rail? The tool box #BAK72204 is pretty tall at 19-1/8 inches so it may not be short enough to fit under the top of the tarp. But if you can verify the height you have of…

view full answer...

Answer 5

Hey Susan, both of the boxes on the Yakima EXO Swing Away Storage System w/ 2 Enclosed Cargo Carriers #Y74ZR are the exact same and have internal dimensions of 51-11/16" long x 17" wide x 14-5/8" tall and external dimensions of…

view full answer...

Answer 6

Hey Michael, The Brandmotion FullVUE Rear View Mirror #BM86YR is a confirmed fit for your 2025 Ram 3500. I reached out to the manufacturer as well just in case and they confirmed this is a direct fit for your vehicle and will work well! I went ahead…

view full answer...

Answer 7

Hi Roger! I contacted Dexter with your axle information and you will need the #25580 inner bearing and #14125A outer bearing. If you want the races as well, you will need the #25520 and #14276 respectively. The seal will be the Double Lip -…

view full answer...

Answer 8

Thanks for the picture Glenn. We've got a couple of Lionshead wheels in gunmetal gray that are pretty similar to the one included with the Westlake ST205/75R15 Trailer Tire with Glossy Black Eagle Aluminum Wheel item #WST79FR. However, we do not…

view full answer...

Answer 9

I can definitely help and get you set up. If your truck does not have any factory trailer wiring we will basically have to do this from the ground up. First you will install a 4 pin connector part #C58044. This will simply splice in using the…

view full answer...

Answer 10

Hey Lawrence thanks for the information! I wasn't able to find any good pictures of the inside of your Axle Tecknology BD2-655 drums. What you'll need to do is pull one of the hubs off and look at the inside. If they're smooth like the…

view full answer...

Answer 11

The UWS Truck Bed Chest part #UWS01048 has an interior height of 17".

view full answer...

Availability of Chest Style Tool Boxes to Fit Truck Bed Underneath Tonneau Cover

Products Featured in This Question

Product Page this Question was Asked From

Continue Researching