Weight Distribution Systems Made in the USA

Updated 04/24/2018 | Published 04/21/2018

Products Featured in This Question

Blue Ox SwayPro Weight Distribution w/ Sway Control for 2" Hitch - 10,000 lbs GTW, 1,000 lbs TW

(473)

$969.00

TorkLift SuperHitch Everest Weight Distribution System - No Shank - 30,000 lbs GTW, 3,000 lbs TW

(6)

$1994.43

Question:

Which Weight Distribution Systems are made in the US?

asked by: Charles R

Helpful Expert Reply:

There are a few weight distribution systems that are made in the USA. The TorkLift SuperHitch Everest Weight Distribution System # TLWD1000 and all of the Blue Ox SwayPro Weight Distribution w/ Sway Control systems like # BXW1000 are made in the USA.

The best of these options for most trailers is the Blue Ox SwayPro System that is a fit for your total tongue weight. That total tongue weight is determined by the loaded tongue weight of your trailer as well as any cargo behind the rear axle of your towing vehicle. You want that total tongue weight to fall in the middle of the weight distribution system's total tongue weight range. For instance the # BXW1000 has a total tongue weight range of 750 to 1,000 lbs.

I've attached an article to further assist, but let me know if you need a recommendation.

expert reply by: Jason S