Trailer Hitch Fit Recommendation for 2006 Dodge Ram 3500 without Factory Hitch  

We do not have any trailer hitch receivers that mount behind the license plate on your 2003 Dodge Ram 1500 SLT, but we do have a couple that bolt directly underneath it attached to your bumper. We have the Draw-Tite Max-Frame Trailer Hitch Receiver…

The etrailer brand #e98852 and the Draw-Tite #75662 are almost identical. The capacities are the same, they'd both install in the same manner and they're very similarly priced. There are a few differences. The biggest difference is that the…

Unless the hitch from the 2005 Dodge Ram 1500 is the #75662 that mounts to the pre-existing crossmember/beam as shown in the provided diagram it won't fit. The 2005 Dodge Ram and the 2016 Ram 1500 have no other hitch fits in common.

The Curt hitch #14070 that you referenced fits 3500 and up Ram trucks that are cab and chassis models not like your 2008 Dodge Ram 1500. You'd need a Draw Tite hitch like part #41929 if you have the factory hitch or part #75662 for if you…

The Draw-Tite #75662 Trailer Hitch will work perfectly on your 2006 Dodge Ram Pickup. This trailer hitch is rated for a maximum gross trailer weight of 6,000 pounds and a max tongue weight of 600 pounds. This should be more than sufficient to tow the…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

A 4-Way trailer connector has the basic lighting functions only; running lights, left turn signal and brake lights, right turn signal and brake lights, and ground. A 7-Way has these functions and a 12 volt circuit, a circuit for electric trailer…

The OEM prep package consists of 4 "pucks" in the bed of the truck that will allow you to drop in puck style hitches for easy installation and removal, that gives you a completely clear bed when not in use. The B&W Companion OEM 5th…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

To get the B&W Patriot #BWRVK3200 to work with your 2006 Dodge Ram you're going to need a set of 5th wheel rails #DM8552016-71. These rails are custom fit to your vehicle so they'll just bolt right up to the frame. It is worth mentioning…

You are correct, you should only be getting output when the brake is applied, or the override switch is activated. It sounds like the controller might be bad, but to make sure, you should probably bench test it before tossing it. Use a circuit…

The best image I could find of B&W hitch #BWHDRH25211 was in the instructions and it is a line diagram and not an actual picture. But it shows how the new hitch receiver will be directly beneath the factory receiver on your 2012 Ram 2500/3500.