Is Adjustable Ball Mount w/Sway Control Tab 7390 Compatible with Curt Friction Sway Control Bar

Updated 04/09/2018 | Published 04/07/2018

Question:

Hi there, Do you happen to know if this is compatible with the Curt sway control arm. They look pretty much the same but Im wondering about the measurements. thank you.

asked by: Sheree A

Expert Reply:

Yes, you can use the Adjustable ball mount with sway control tab # 7390 with the Curt friction sway control bar. The shank on the ball that will mount to the tab on this ball mount is plenty long enough and is in the right position so that the sway control unit is at the proper angle.

expert reply by: Michael H