Underhood Connection Points for Trailer Wiring on a 2010 Mitsubishi Outlander
Updated 08/01/2011 | Published 07/30/2011
Question:
LOCATION FOR PLUG IN WIRING HARNESS THAT PLUGS IN BY THE BATTERY BEHIND THE HEAD LIGHT ON A 2010 MITSUBISI OUTLANDER
asked by: DON P
Expert Reply:
First, locate the vehicle battery under the hood of your 2010 Mitsubishi Outlander. It will be on the driver side. You will need to move it rearward as much as possible, or completely remove it from its position, to gain access to the area behind the headlight.
Look for the wiring harnesses behind the headlight. Taped to one of them should be a wire with a gray connector on the end that is not connected to anything. It is possible that the harness is further back or has fallen off and you will need to fish around for it.
I have included a link to the installation details for you for reference.
Product Page this Question was Asked From
T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector
- Custom Fit Vehicle Wiring
- Trailer Hitch Wiring
- Vehicle End Connector
- Powered Converter
- No Tow Package
- 4 Flat
- Plug and Lead
- Plug-In
- Hidden
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Wiring Harness for a 2011 Mitsubishi Outlander
- Q&A: Replacement Disc Brake Caliper for a Tie Down Engineering 46304 Caliper