How to Install a Brake Controller on a 2015 International 7400
Updated 03/30/2018 | Published 03/29/2018
Products Featured in This Question
Question:
where do I hook up a electric brake box into a 2015 international 7400 flat bed truck
asked by: Randy
Expert Reply:
In order to install a brake controller on your 2015 International 7400, you would need to hardwire one into the vehicle's wiring harness as we do not have a plug-in adapter for you. I recommend using the Tekonsha Prodigy P2 Trailer Brake Controller part # 90885. The Tekonsha Prodigy P2 comes with a pigtail adapter that has 4 wires that will need to be ran for installation.
Red Wire: Stop Light Switch (Cold Side of Brake Pedal)
White Wire: Ground
Blue Wire: Brake Output
Black Wire: 12 Volt Power
In order to complete these connections you will need some additional wires and circuit breakers. For this, I recommend using the Wiring Kit for Electric Trailer Brake Controllers part # 5506 which will complete the connections for a brake controller assuming you already have a 7-way. If you do not already have a 7-way on the vehicle then you will need a combination of both part # 119250KIT and part # ETBC7 instead.
Product Page this Question was Asked From
Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Electric over Hydraulic
- Splice-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Parts Needed For Installing 7-Way And Brake Controller On 2015 international Durastar
- Shop: Brake Controller
- Shop: Curt Ball Mount for 2-1/2" Hitches - 6-1/2" Rise, 8" Drop - 20K
- Search Results: brake caliper
- Q&A: Brake Controller Recommendations for 2009 International Workstar
- Q&A: Installing an Electric Brake Controller in a 2017 Nexus Ghost on an International Chassis
- Shop: Demco Trailer Coupler - Flat Plate Mount - eZ-Latch - Black - 2-5/16" Ball - 21,000 lbs
- Shop: Wiring Kit for 2, 4, 6, and 8 Brake Electric Trailer Brake Controllers
- Shop: Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires
- Shop: Curt Heavy Duty Forged Ball Mount for 2-1/2" Hitch - 2-5/16" Ball - 8" Drop - 20K
- Shop: Tekonsha Primus IQ Trailer Brake Controller - Up to 3 Axles - Proportional
- Shop: Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional
- Search Results: license plate bracket
- Search Results: spring bushing
- Search Results: shackle
- Search Results: shackle straps
- Video: Let’s Check Out the Optronics Dual Bulb Trailer Clearance and Side Marker Light
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Shop: Trailer Wiring
- Video: Replacement Brake Pads for Dexter Disc Brakes Feature Review
- Q&A: Brake Controller Recommend 2011 International 7400 with Air Brakes for Trailer w Electric Brakes
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Brake Controller Installation: Starting from Scratch
- Q&A: What is the Difference Between the Tekonsha Prodigy P2 and the P3 Brake Controllers
- Article: Trailer Wiring Diagrams
- Q&A: Brake Controller Recommendation for a Truck with Air Brakes and a Trailer with Electric Brakes
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: How to Measure for Trailer Hitch Drop