Dimensions of Draw-Tite # 41946

Updated 03/12/2018 | Published 03/10/2018

Question:

2006 Winnebago Outlook on Ford E450 Chassis. Currently has a Class 3 hitch but I would prefer a little more tongue weight capacity. The bolt holes in frame are 38 5/8inch side to side on current hitch. Do you know bolt hole spacing on #41946 front to back? Also any info available on dimension of receiver. Do you know if this hitch might fit? Thank you

asked by: Jack R

Helpful Expert Reply:

The Draw-Tite Ultra Frame Trailer Hitch Receiver w/ Cast Center # 41946 is a confirmed fit for the 1996-2018 Chevy Express and GMC Savana Vans.

There is not a confirmed fit for any E450 models, but I did measure the hitch as you requested to see if you can confirm a fit on your 2006 Winnebago Outlook. The width is 40-11/16 inches center on center. The holes on the sides are 1-1/2 inches on center 11-1/2 inches on center and 3-7/8 inches on center back to front. I've attached a photo to assist.

The vehicle is usually the limiting factor when utilizing a trailer hitch, so you will need to confirm what your vehicle is capable of towing safely.

expert reply by: Jason S