Does Rear Bumper and Fascia Need to be Removed to Install EcoHitch on 2013 Subaru XV Crosstrek

Published 03/09/2018

Products Featured in This Question

EcoHitch Invisi Trailer Hitch Receiver - Custom Fit - Class III - 2"

(165)

$402.47

Draw-Tite Max-Frame Trailer Hitch Receiver - Custom Fit - Class III - 2"

(186)

$188.94

Question:

With this hitch can i install this without taking the rear bumper and if so how easy is it to put the pin or screw to secure the rack firmly?

asked by: Robert U

Expert Reply:

The EcoHitch Invisi Trailer Hitch Receiver # 306-X7203 referenced in your question is confirmed to fit your 2013 Subaru XV Crosstrek as long as it features a center knock-out panel in the lower rear fascia. To install this particular Class III hitch, you will need to temporarily remove the bumper/fascia on your XV Crosstrek. This is because of the unique design on the EcoHitch that provides a completely hidden appearance behind the rear bumper once installed. This offers a really sleek look when the hitch isn't in use, along with added ground clearance, but the recessed nature will make it a bit more difficult to install and tighten the hitch pin for your bike or cargo rack.

If you would rather not remove the bumper/fascia during installation, and are okay with a hitch that is slightly more visible, I instead recommend the Draw-Tite Max-Frame Trailer Hitch Receiver # 76084. This Class III hitch is also custom-fit for your XV Crosstrek, which means it will use existing holes in the vehicle's frame for a no-drill installation. Since it will sit under the rear bumper instead of behind it, the receiver will be a bit more accessible for installing your bike rack and hitch pin.

I have attached an installation video on your vehicle that you can use for reference, along with the written installation instructions.

expert reply by: Chris R