Ramp Compatibility for Kubota L2501 with Rear Attachments
Updated 03/05/2018 | Published 03/03/2018 >
Question:
Hmm sierra 2001. Kubato L2501 with rear attachments
asked by: Rickey L
Helpful Expert Reply:
Your Kubota L2501 weighs between 2425 to 2623 pounds so the Aluminum Car Hauler Ramp Set # 288-07501 rated for 6,000 lbs will work well for the weight. You will simply need to determine if your loading height of your trailer will be over 12 inches as that is the maximum height for the length of these ramps. If your loading height is 16 inches or under you can use # 288-07503.
Your 2001 Sierra can tow that car hauler trailer without issue or be hauled on that trailer using these ramps to load.
If you have more specific questions, let me know.
Product Page this Question was Asked From
Aluminum Car Hauler Ramp Set - 48" x 14-1/2" - 6,000 lbs - Qty 2
- Car Ramps
- Loading Ramps
- Car Hauler Ramps
- 6000 lbs
- Strap-On
- 14-1/2 Inch Wide
- 48 Inch Long
- Aluminum
- Stallion
more information >
Continue Researching
- Q&A: Do Aluminum Car Hauler Ramps Come as a Set
- Q&A: Recommended Redarc Brake Controller and Mounting Panel for a 2024 Nissan Frontier
- Article: Holiday 2025 | Best Gifts for Towers
- Q&A: Recommended Car Hauler Ramp Set For Trailer With 15" Loading Height
- Q&A: Recommended Non-Brake Replacement for Dexter 8-243 Hub/Drum
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: The Best Electric Trailer Jacks of 2025
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Recommended Loading Ramp for 2002 Triton Elite Trailer
- Q&A: Bearing Kit For Curt/Lippert 7,000 lb Trailer Axle
- Q&A: Finding Replacement ABS Brakes By Lippert For 2024 Keystone Montana High Country 7K axles
- Article: 30-Amp and 50-Amp RV Service: What's the Difference?
- Article: Anti-Rattle Devices
- Article: Trailer Wiring Diagrams

