Dimensions of Demco Unassembled Hydraulic Brake Actuator # 6049
Published 02/22/2018
Question:
hello, how wide and tall and long is this unit? ,,, i do need a 4 inch wide,, 6 inch tall and the one on the trailer is 16 inches long, , would like to cut out and weld one back in the same hole. emportance is 4 inch wide,, if this will not work please recomend one .pulling trailer with bobcat .. thanks
asked by: Ricky P
Expert Reply:
The Demco Unassembled Hydraulic Brake Actuator - Drum - 20K # DM6049 will have the housing that is 19-3/4 inches long by 4 inches wide by 6 inches tall according to my contact at Demco. The overall length including the actuating channel would extend to an overall 24 inches. This will be the same as the preassembled options for Demco 20K Systems.
We don't have one that is exactly 16 x 4 x 6, so you will need to make minor modifications or just have the actuator stick out farther from your assembly.
Product Page this Question was Asked From
Demco Unassembled Hydraulic Brake Actuator - Drum - Raw - 8" Adjustable Channel Center - 20K
- Brake Actuator
- Surge Brake Actuator
- Construction Trailer
- Farm Trailer
- Weld-On
- 20000 lbs GTW
- Channel
- 3 Inch Channel Tongue
- Drum Brakes
- No Lockout
- Demco
more information >
Featured Help Information
Instructions
Miscellaneous Media
Continue Researching
- Q&A: Is the 3,500 lb Rating for Curt C80136 Safety Cables Per Cable or Per Pair?
- Q&A: Replacement Master Cylinder for Titan Aero 6000 Disc Brake Actuator
- Q&A: Reverse Lock Out Solution for Demco Actuator DA10
- Q&A: Replacement Surge Brake Parts for 2004 5 Starr Boat Trailer
- Q&A: Recommended Replacements for Tie Down Engineering Model 20 Actuator
- Q&A: Comparing Bypass and Non-Bypass Electric Reverse Lockout Solenoids for Surge Couplers
- Q&A: Trailer Surge Brake Coupler Operation
- Article: Parts Required to Add Electric Over Hydraulic Drum Brakes to a Trailer
- Article: Adding Electric Over Hydraulic Disc Brakes