How to Position the Kats Heaters Thermostatically Controlled Circulating Tank Heater # KH13150
Updated 02/13/2018 | Published 02/12/2018
Question:
The instructions that I found online, say to install the tank vertically, but did not indicate which end should be UP.
asked by: Lee F
0
Expert Reply:
You will want to position the Kat's Heaters Thermostatically Controlled Circulating Tank Heater # KH13150 vertically with the plug at the bottom.
This is indicated by the "coolant flow" arrow on the side of the heater (see attached picture). Just orient it with this arrow pointing up and you are good to go!
expert reply by:
Jon G
0
click to enlarge
Product Page this Question was Asked From
Kat's Heaters Thermostatically Controlled Circulating Tank Heater - 120V - 1,500 Watts
- Vehicle Heaters
- Circulating Heater
- External Tank
- 120 Volts
- 1500 Watts
- 26 - 40 Quart Cooling System
- Kats Heaters
more information >
Continue Researching
- Q&A: Looking For Replacement Propane Regulator For 2014 Dutchman Voltage 5th Wheel
- Q&A: How Does Kats Circulating Tank Heater KH13150 Install
- Q&A: How Does The Kat's Heaters Thermostatically Controlled Circulating Tank Heater Position For Install?
- Article: Gooseneck to 5th Wheel Adapters
- Article: 5th Wheel to Gooseneck Adapters
- Q&A: How to Determine the Right Air Pressure to Fill a Trailer Tire
- Q&A: Trailer Vibrates at Speeds Over 65 MPH, Should Tires Be Balanced
- Q&A: Timbren Front Suspension Enhancement Recommendation for a 2002 Dodge Dakota
- Q&A: How to Pick Out Replacement Hub for Trailer that Sheared Off Studs
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: Stability Control for Heavy Duty Vehicles
- Article: Trailer Wiring Diagrams
- Article: How to Measure for Trailer Hitch Drop
- Article: What are the Common Types of Propane Fittings Used on RVs?