Can Titan Breakaway Switch be Used to Replace TAP Breakaway Switch
Updated 02/05/2018 | Published 02/03/2018
Question:
I have a TAP system. Will this work if i simply cut off the old controller and splice this one on? Thanks,
asked by: Julian P
0
Expert Reply:
Breakaway switches are pretty basic. There are a couple of metal contacts inside that are kept separated by the pin. When the pin is pulled out the contacts touch and complete the circuit from the breakaway battery to the brakes. So you can use an alternate switch such as # N65113 in place of the one you have and it will work well.
expert reply by:
Michael H
0
click to enlarge
Product Page this Question was Asked From
Replacement Breakaway Switch for Dexter BrakeRite I Electric-Over-Hydraulic Actuator
- Accessories and Parts
- Brake Actuator
- Disc Brakes
- Hydraulic Drum Brakes
- Breakaway Parts
- Switch
- Dexter
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Troubleshooting Dexter Electric Over Hydraulic Actuator that Won't Work Consistently
- Article: Trailer Wiring Diagrams
- Q&A: Wiring Diagram for Titan BrakeRite EHB Electric-Hydraulic Actuator # T4822500
- Q&A: Winch Recommendation for 10,000 lb Boat
- Q&A: Replacement for Dometic RM 2652 In Wilderness Lite 25J
- Q&A: Troubleshooting Dexter DX Series EOH Actuator Not Shutting Off
- Q&A: Replacement 12V 7 cu ft Refrigerator for Travel Trailer
- Q&A: Looking for Best Disc Brake Actuator Recommendation for Boat Trailer with 6k Axles
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: Electric Trailer Brakes: How They Work & What to Buy
- Article: RV AC Not Cooling? What's Normal, What to Check, and When to Replace
- Article: What RV AC Will Work With Your Setup? Avoid Costly Mistakes Before You Order