Measurements of the Brophy Hitch Extender # HE06

Updated 07/05/2011 | Published 07/02/2011

Question:

Can you supply the inside and outside measurement from the center of the receiver pin hole to the shank as you did with part 80307? Thanks.

asked by: J R

Expert Reply:

I went out into our warehouse and measured a Hitch Extender # HE06 and found that it is 12 inches in overall length, has a distance of 7-3/8 inches from the hitch pin hole to hitch pin hole, and has a distance of 4-5/8 inches from the 2 inch hitch pin hole to the inner shank that slides into a hitch.

The distance from the pin hole back to shank on the inside of the receiver is 3-1/4 inches. This measurement is not pictured.

Check out the picture I attached to see the measurements that I took on the Hitch Extender # HE06.

I attached an FAQ on hitch extenders for you to check out also.

expert reply by: Jameson C