Can Pop Up Camper Trailer Hand Winch be Replaced with Electric Winch

Question

Question:

We have a 2001 Bonaire 1200 hardtop camper trailer, unfortunately our old crank under the floor of the camper has worn out, very hard to find this part. It is a huge 12 x 6 roof, very nice camper with a slide out dining area Our question is, can we replace the older worn crank with an electric crank? Our old crank part # is Shelby 5438 winch Thank you for helping us with this Sincerely,

asked by: Jerry D

0

Expert Reply:

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch.

We have the Superwinch LT2000 # 1120210 that will load both in and out.

expert reply by: Jameson C

0

Answer 1

We have 12 volt winches like the Superwinch LT2000 part #1120210 that would work well for what you need as this has a 2,000 lb capacity but we do not carry the specific winch you are looking for.

view full answer...

Answer 2

If you're going to use a winch to raise and lower your popup you will want a winch that power loads both in and out. With a winch that will only power load in you will only be able to raise the popup and not lower with the winch. We have the…

view full answer...

Answer 3

Hey Kevin, I took some overall measurements on the Replacement Power Unit for etrailer and Ram Hydraulic Trailer Jacks and Scissor Hoist Systems #e43VV and drew up a little diagram below. If you need any other specific measurements just let me know…

view full answer...

Answer 4

The trailer hitch I highly recommend for your 2019 Jeep Grand Cherokee Altitude is the Draw-Tite #75699 because it has a concealed crosstube so your Jeep maintains its clean look and is also strong, with a 5,000 lb towing capacity and 500 lb tongue…

view full answer...

Answer 5

When replacing the electric winch on your 2007 Rockwood popup camper, you want to look at the weight rating and mounting-plate bolt pattern of your current winch along with the dimensions to ensure fitment. It looks like the Superwinch LT3000 ATV…

view full answer...

Answer 6

The Superwinch LT2000 ATV Winch - Wire Rope - Roller Fairlead - 2,000 lbs, part #1120210, you attached to your question draws 100 amps, well beyond the 15 amps provided by the 12-volt cigarette lighter in your vehicle. You will have to connect this…

view full answer...

Answer 7

On your trailer if you can bolt winch #1120210 directly to that front frame structure then that would be ideal. If you want it on the diamond plate you will want to use a steel backing plate that is also bolted to that front frame structure. That…

view full answer...

Answer 8

While we don't have any custom fit trailer wiring harnesses that fit the 2011 Isuzu NPR we can still help with a universal fit option like the #C56175 which you'd have to wire to the taillight circuits of your NPR.

view full answer...

Can Pop Up Camper Trailer Hand Winch be Replaced with Electric Winch

Product Page this Question was Asked From

Continue Researching