Could Hopkins Backup Sensor System # HM60100VA be Used on Front of Truck  

While I do not see any reason connecting the Hopkins Backup Sensor System #HM60100VA to the factory tow package wiring on your 2023 Ford Maverick would not work, this is something you will want to test first. You can see the power and ground…

You're correct, the MORryde Wall RV TV Mount #MR57RR does only have a 20lb capacity. The #MR57RR drops down and has side to side horizontal tilting, but does not have a vertical tilt for the connection point to the TV. The closest option we carry…

The MORryde Wall RV TV Mount #MR57RR weighs 16lbs. It can support a TV that weighs up to 20lbs. The TV will need one of the following VESA patterns 100mm x 100mm, 200mm x 100mm, or 200mm x 200mm. Or you can use the VESA Adapter Plates #MR74RR to fit…

On the Hopkins Backup Sensor System #HM60100VA it should only beep if it detects something at the back of the vehicle within the range of the sensors. Just having power to the system should not set off the alert. You can try to wire it into the…

The Hopkins Backup Sensor System part #HM60100VA will install independently of the factory backup camera system. It does come with its own speaker but there is no way to integrate this into the vehicle's stereo if that is what you are asking nor…

You will have to go with a sliding hitch to allow the trailer to make tight turns. For a trailer 8 feet wide the only bed length that's going to allow 90 degree turns without a slider is a stationary hitch. That being said you have two options.…

The best set of air bags for your 2024 Chevy Silverado 2500, that are compatible with an in bed hitch, are the Firestone Ride-Rite Air Helper Springs item #F2613. These air bags have a 5,000 lbs capacity that will level out the rear end of your…

The difference between the Class II and Class III hitches has to do with their Gross Trailer Weight (GTW), their Tongue Weight (TW), and their Hitch Receiver Size. Class II trailer hitch receivers have a 1-1/4 inch receiver and can be rated up to…

Hey Chris, Because the Thule TracRac TracONE Truck Bed Ladder Rack #TH27000XTB clamps to the lip of the bedrails it won't be compatible with any tonneau cover. You would need Thule's stake pocket mounted version the TracRac SR #TH43002XT-508…