Hole Spacing Measurements for Valterra RV Sewer Spigot with Flange - 1-1/2" Item # T1006-1

Updated 09/18/2017 | Published 09/16/2017

Question:

Do you want to be a superstar of descriptive writing? Heres one great tip. Please include hole centerline dimensions wherever you can in the initial description. I would say that IDs, ODs, and hole centerlines are the most often needed, yet not provided, information in product descriptions. It is very difficult to track down dimensions and they are often very important to know before buying a part. My example is the hole centerlines of ABS square-base flanges. In particular, I need hole dimensions for the 1-1/2inch pipe square bottom sewer spigot flange, item #T1006-1. Thanks.

asked by: Paul S

Helpful Expert Reply:

I went out to the warehouse to measure Valterra RV Sewer Spigot with Flange - 1-1/2" Item # T1006-1 for you. The holes are spaced 2-7/16 inches apart on center up and down and side to side. Diagonally they are space 3-7/16 inches apart on center.

The outer diameter of the tube is 1-15/16 inches. The overall dimensions of the square part are 2-7/8 inches wide by 2-7/8 inches tall.

expert reply by: Michael H