How to Wire the Optronics LED Light to a 1999 Winnebago Minnie

Updated 08/31/2017 | Published 08/30/2017

Products Featured in This Question

Optronics 12V LED RV Dome Light - Single - 6-3/8" Long x 4-3/16" Wide - White Housing

(829)

$10.53

Hook Probe Circuit Tester

(66)

$13.25

Question:

I have no instructions with these lights and remember from a review something about the wiring being opposite the usual color codes. I would like clarity from you as I will be changing the lights myself and do not want to mess up. I have a 1999 Winnebago Minnie and am changing the old lights for these ones. Which wire goes where?

asked by: Rebecca S

Expert Reply:

The Optronics LED RV Interior Light, # RVILL33, has a two wire connection. The black wire is for 12 volt power and the white wire is to ground.

To figure out which wire goes where on you RV, I recommend using a circuit tester like # PTW2993 to test your RV's wires to see which has power and which is the ground. This will help if your RV wiring is a different color than the light. I would test even if your wires are black and white just to make sure you have the correct wire.

expert reply by: Jared P