Will the Curt Trailer Hitch Receiver C11265 Fit on a 2011 Toyota Corolla Sport

Updated 07/08/2017 | Published 07/07/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class I - 1-1/4"

(570)

$178.93

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(44)

$64.29

Curt Cam Buckle Stabilizing Strap for Hitch-Mounted Accessories - 61" x 1" - Qty 1

(666)

$16.01

Question:

Will your hitch 112651 that is made to work with 2011 Toyota corolla work with mine? Mine is the 2011 but it is a Sport or S model.

asked by: Don H

Expert Reply:

The Curt Trailer Hitch Receiver # C11265 is confirmed to fit all models of the 2011 Toyota Corolla. This is a 1-1/4 inch receiver that comes with a drawbar that has a 1-7/8 inch hitch ball. The drawbar has a Rise of 2-5/8 inches which you will want to make sure is correct for your towing application. I have attached a helpful article that you can use to assist you.

Keep in mind that if you end up using this hitch for any non-trailer loads (like a cargo carrier or bike rack) you will need to use a Support Strap # 18050 to secure it per the Curt warranty.

For a complete towing setup you will also need a connector at the rear of your Corolla for the trailer lights. I recommend going with the Tekonsha T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118459 as Tekonsha is one of our most reliable brands when it comes to wiring. To install this you will simply need to T the ends into your taillight housing and run a 12V wire up to your battery. I have attached an installation video that you can use as a reference.

expert reply by: Jon G