Could a Wet Bolt with a Zerk Grease Fitting be Used When Installing Trailer Springs
Updated 03/31/2011 | Published 03/30/2011
Products Featured in This Question
Question:
Can wet bolts be used for springs to shackles or just equalizer. Thanks
asked by: Keith
0
Expert Reply:
As long as the Wet Equalizer Bolt with Locknut and Grease Zerk, part # 126B2, is the right dimension for the springs that you have, you could use it.
expert reply by:
Jameson C
0
Product Page this Question was Asked From
Wet Equalizer Bolt with Locknut and Grease Zerk for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Suspension Bolts
- Camper
- Car Hauler
- Utility Trailer
- 9/16 Inch Diameter
- 2-5/16 Inch Long
- Redline
more information >
Continue Researching
- Article: Trailer Wiring Diagrams
- Q&A: Wet Bolt Recommendation For the Roadmaster Comfort Ride Leaf Spring Suspension Kit
- Q&A: What Roadmaster Comfort Ride System Should I Use for my 2025 East to West AHARA?
- Article: How to Accurately Measure Trailer Leaf Springs
- Q&A: Replacement Leaf Spring for a Dexter 072-079-01 Leaf Spring
- Q&A: Do Bronze Bushings Need to be Used with MORryde X Factor and Roadmaster Comfort Ride
- Article: How to Tell the Weight Rating of a Trailer Axle
- Q&A: Will The Kodiak Disc Brake Kit K2HR10A11RERR Fit An AL-KO 10k #99 Spindle?
- Q&A: Replacement for AL-KO 5,200 lb Axle
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: Recommended Replacement Weld on Trailer Jack for a Phoenix Boat
- Article: How to Replace Trailer Leaf Springs in 5 Steps
- Article: Double-Eye Trailer Suspension System Review