How Long are the Threaded Parts of Trailer Axle U-Bolt 176400-Z
Updated 06/09/2017 | Published 06/08/2017
Question:
Im looking for u-bolts that will fit a thin leaf pack read: 2-3 leafs thick and need to know how many inches of threaded shaft are on these u-bolts? With the smaller thickness leaf pack, I need the nuts to tighten down all the way before bottoming out where the thread stops as I dont want to run a spacer/block to fill up the remaining gap. Thanks.
asked by: Jake
Expert Reply:
The threaded part of u-bolt # 176400-Z is approximately 2-1/2 inches long. The other options for 2-3/8 inch diameter round axles are a little less so # 176400-Z is the best option.
Product Page this Question was Asked From
Replacement U-Bolt with Nuts for 2-3/8" Round Trailer Axles - 1/2" Diameter - Zinc Plated
- Trailer Suspension Parts
- U-Bolts
- Boat Trailer
- Snowmobile Trailer
- 3500 lbs
- Round Axle - 2-3/8 Inch
- 1/2 Inch Diameter
- 5-1/2 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Replacement Suspension Components for Mallart M210RB
- Q&A: Replacement Leaf Spring for 7k Rated Trailer Axle that is 25-1/4 inch Long
- Article: Double-Eye Trailer Suspension System Review
- Q&A: Availability of 7k Trailer Axle Leaf Spring that is 25-1/4 inches Long
- Q&A: Can E-Z Flex Rubber Suspension System Work w/ Wide Trax Trailer Suspension
- Q&A: Upgrading Leaf Springs, Equalizers, and Wet Bolt Kit for 2018 Jayco 265RLS
- Article: 5 Tell-Tale Signs It’s Time to Replace Your Trailer’s Leaf Springs
- Q&A: Do You Have Zinc Plated 3-1/2" Long Wet Bolts?
- Q&A: Determining The Correct Replacement Leaf Springs For A 2021 Keystone Passport Grand Touring TT
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Breakaway Kit Installation for Single and Dual Brake Axle Trailers
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: How to Measure a Trailer Axle
- Article: How to Accurately Measure Trailer Leaf Springs