Do You Have Zinc Plated 3-1/2" Long Wet Bolts?
Updated 06/02/2025 | Published 05/26/2025
Products Featured in This Question
Question:
I need some 3-1/2 long shackle bolts that are zinc plated or galvanized for my boat trailer. Do yall offer any this length?
asked by: Cody C
0
Expert Reply:
Hey Cody. The longest zinc plated shackle bolt we have is the Replacement Wet Shoulder Bolt item # MR52HR. It measures 9/16" x 3-3/8". They're sold as part of a kit with the MORryde Suspension Upgrade Kit for Tandem Axle Trailers item # MR76ZR.
What kind of trailer do you have? You can add this information and any other questions you have in the box that says Reply to Jerred H.
expert reply by:
Jerred H
0
Product Page this Question was Asked From
Zinc Shackle Bolt for Double-Eye Springs - 3" Long
- Trailer Suspension Parts
- Shackle Bolts
- Boat Trailer
- Camper
- Car Hauler
- Snowmobile Trailer
- Utility Trailer
- 9/16 Inch Diameter
- 3 Inch Long
- TruRyde
more information >
Continue Researching
- Search Results: trailer suspension parts
- Search Results: trailer leaf spring bushings
- Search Results: morryde uo12~016
- Search Results: 9/16 lug nut
- Shop: Replacement Front Jack for Lippert Ground Control 3.0 Leveling System
- Q&A: Will MORryde Suspension Upgrade Kit MR98ZR Work With Road Armor Equalizers?
- Q&A: Grease Maintenance Schedule for Lippert Ground Control LCI 3.0 Leveling Jacks
- Q&A: Troubleshooting A Ground Control 3.0 Leveling System Middle Jack That Won't Retract
- Q&A: Is Correct Track Trailer Alignment and Lift Kit Compatible With MORryde Suspension Upgrade Kit
- Q&A: Availability Of Replacement Hall Effect Motor And Controller For Lippert Leveling System
- Q&A: Replacement Control Module For Control Module 346005 On 6-Point Lippert Ground Control
- Shop: Replacement Lead Leg for Lippert Components Ground Control 3.0 Electric Leveling System - Qty 1
- Shop: Replacement Lead Leg for Keystone Montana 5th Wheel Landing Gear
- Shop: Replacement Follow Leg for Keystone Montana 5th Wheel Landing Gear
- Shop: Replacement Lead Leg for Venture 5th Wheel RV Landing Gear
- Q&A: Can I Use Grease To Lubricate Nylon Bushings On Trailer Leaf Springs?
- Shop: Replacement Wet Shoulder Bolt - MORryde Suspension Upgrade Kits - 9/16" x 3-3/8" - Qty 1
- Shop: Dexter Bronze Bushings - Qty 4
- Search Results: seelevel sensor
- Search Results: 814200
- Search Results: trailer brakes
Cody C.
5/29/2025
Hey Jerred I have a sportsman's trailer made by steelco inc. It had a slipper spring setup and I'm trying to convert it to a double eye. My plan is to use the existing mount and use a 3-1/2 bolt to bolt the shackles on then use washers to take up the gap that will be between the spring and the shakle. Everything needs to be galvanized so it won't rust because olinlaunch in saltwater and my last axle setup only lasted 2 years