Troubleshooting Trailer Wiring Converter Box On 2012 Dodge Journey

Updated 06/06/2017 | Published 06/04/2017

Products Featured in This Question

Hook Probe Circuit Tester

(60)

$12.27

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(216)

$70.89

T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(37)

$65.02

Question:

My right turn signal does not work coming out of converter box trailer wiring on 2012 dodge journey. New wires but only just plugged into trailer after 1 ear of being on. Used tester. All other lights work including left blinker.

asked by: Mark H

Expert Reply:

If you used a circuit tester like # PTW2993 to check that right turn signal going into the converter and coming out of the converter and it works going in but not coming out, there are really only 2 possible options. The first is that you have a bad ground to your converter and just need to make sure you have a clean metal to metal connection. If your right turn and stop still won't work after cleaning a ground, then the converter is bad and will need to be replaced.

If you need to replace your wiring harness, I recommend the T-One Vehicle Wiring Harness with 4-Pole Flat Trailer Connector # 118567 if you have incandescent lights and # 118536 if you have LED lights on your Journey. Both of these wiring harnesses install behind your tail lights on either side and require a power cable from the battery and a ground.

expert reply by: Jason S