Distance Between Mounting Holes of Channel Tongue Trailer Coupler CT-2003-Z
Updated 06/01/2017 | Published 05/31/2017
Question:
This is supposedly a standard replacement for a bolt on 17/8 inch by 3 inch channel but the specs do not say what the measurements are between the mounting holes. My old hitch was 21/4 inches. Is this the same ?
asked by: Joe N
0
Expert Reply:
The distance between the mounting holes on the coupler part # CT-2003-Z is 2-1/4 inches like what your old coupler has so this will be a direct replacement.
expert reply by:
Jameson C
0
click to enlarge
Product Page this Question was Asked From
Channel Tongue Trailer Coupler - Trigger Latch - Zinc - 1-7/8" Ball - Bolt On - 2,000 lbs
- Straight Tongue Trailer Coupler
- Standard Coupler
- 1-7/8 Inch Ball Coupler
- Bolt-On
- 2000 lbs GTW
- 3 Inch Channel
- Trigger Latch
- 2-Bolt
- Marine Grade
- etrailer
more information >
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Hopkins HM40975-11998 Trailer Connector - What Is The White Wire For?
- Q&A: Availability of a Trailer Coupler that Fits a 3-1/2 Inch Wide Tongue
- Q&A: Does the Hopkins 4-Way Flat to 7-Blade Plug-In Trailer Connector Adapter Have a Mounting Bracket?
- Q&A: Should Titan Model 10 Surge Brake Actuator Be Locked Out Or Replaced For EOH Brakes?
- Q&A: Looking For 4.80-12 Tires That Have A Speed Rating Higher Than 55 mph
- Q&A: Lug Nut Torque for a Trailer Wheel
- Q&A: Replacement Coupler for Shelby 5107 Trailer Coupler
- Article: Trailer Lighting Requirements
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)
- Article: Most Popular Wheel Bearings
- Article: What Do I Need To Tow A Trailer?
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Types of Bumpers
- Article: Hand Winches