Recommended Brake Controller Wiring And Weight Distribution System For 1996 Toyota 4Runner
Updated 05/26/2017 | Published 05/25/2017 >
Products Featured in This Question
Question:
ETrailer, I am adding electric brake control to my 1996 4Runner. I already have the 7-pin connector, is this all I need to pull a 2700# camper truck weighs about 4200#? 1 item 5535 Draw-Tite I-Command Trailer Brake Controller 2 9506P In-Line Circuit Breaker - 20 Amp 3 10 Gauge Primary Wire A/R
asked by: Jake O
Expert Reply:
Your 1996 Toyota 4Runner has a towing capacity of 3500 lbs, so that 2700 lb camper is more than half of your vehicle weight so you may want to consider a weight distribution system as well as the brake controller.
For your brake controller, the Tekonsha BRAKE-EVN # TK63VR you referenced will need to be hardwired. I recommend using the Replacement Brake Control Plug-In Harness for Tekonsha and Draw-Tite Brake Controller 12" Long # 20127 to keep your brake controller connection intact.
For your other wiring to your current 7-way, I recommend using the wiring kit for brake controllers # 5506. This will give you the wire for your 12V connection and your brake controller as well as the circuit breakers and other connectors. I've attached a video of this install for you.
For a weight distribution system, I recommend the Fastway e2 Weight Distribution w/ 2-Point Sway Control - Trunnion - 6,000 lbs GTW, 600 lbs TW # FA92-00-0600 along with the 2" Hitch Ball for Equal-i-zer Weight Distribution Systems - 8,000 lbs # EQ91-00-6080. This system will give you the extra stability and sway control that will be helpful for a trailer over 50% of the tow vehicle weight. I've attached an article to help further.
Product Page this Question was Asked From
Tekonsha BRAKE-EVN Trailer Brake Controller - 1 to 4 Axles - Proportional
- Trailer Brake Controller
- Proportional Controller
- Electric
- Plug-In
- Under-Dash Box
- Under-Dash
- Up to 4 Axles
- LED Display
- Single Trailer Only
- Tekonsha
more information >
Featured Help Information
Instructions
Miscellaneous Media






Continue Researching
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)
- Q&A: My Vehicle has a 4-Pin Trailer Plug, but Trailer has 7-Pin Trailer Plug
- Article: Brake Controller Installation: Starting from Scratch
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: Towing a Trailer? Let's Talk About Brake Controllers
- Q&A: Parts Needed to Add 7-Way and Install Brake Controller 2015 Ram ProMaster 1500
- Q&A: What is the Difference Between a 4-Way and 7-Way Trailer Connector
- Article: How to Install a Brake Controller on Chevrolet / GMC 1999-2006 Pickups
- Q&A: Installing a 7-way Trailer Connector on a 2018 Subaru Outback
- Q&A: Should I Get a Proportional or Time-Delayed Brake Controller
- Q&A: Replacement Surge Brake Actuator For Atwood 61101
- Q&A: Replacement for Atwood 61101 Brake Actuator
- Article: How to Choose the Right Trailer Hitch Class

