bing tracking image
Q & A Icon

Weight Rating and Light Wiring for Lighted Westin Running Boards 27-0005-2165  

Updated 05/25/2017 | Published 05/24/2017

Question:

Hello I have a 2017 Toyota 4Runner SR5 and am interested in these Westin lighted running boards. What is the weight rating for these boards? How and where do the lighting harnesses plug into? Thank you!

0

Expert Reply:

The Westin Lighted Running Boards part # 27-0005-2165 that you referenced are a confirmed fit for your 2017 Toyota 4Runner so they would be a great choice. These have a 300 lb weight capacity.

Here's the instructions:

Determine whether your vehicle has a positive or negative switching courtesy system or an auxiliary light source (most Fords).
Obtain an accurate wiring diagram for your vehicle's courtesy light system.
For positive and negative switching:
Locate a pass-through point (usually under carpet at driver side door sill) for the wire harness. Locate main courtesy wire
(usually wire lead to dome light). NOTE: If you do not use the main courtesy wire, lights will only function when one door is
open. Route wire harness so that the 2 female connections (from step board) are nearest to pass thru point.*Connect
opposite step board lead to either connection. Connect the splicing lead to remaining female socket and route one wire
thru pass thru point. SEE FIGURE 9.

expert reply by:
0
Jameson C
click to enlarge

Product Page this Question was Asked From


Q & A Icon

Continue Researching

See More Q&A Expert Answers >>