Troubleshooting Lack Of 12V Power On 7-Pin Trailer Connector When All Other Functions Work
Updated 04/06/2017 | Published 04/05/2017 >
Products Featured in This Question
Question:
2016 f-250 SD 6.7PSD. Everything works but the 12v aux power on both 7 pin connectors
asked by: Wiliam
Expert Reply:
I recommend checking your fuses and relays on your 2016 Ford F-250 under the hood in the fuse box. I recommend also checking for loose cables and testing the wires with a circuit tester like # PTW2993 to see if you can isolate the short. If it is a factory 7-way, and both the fuses and relays are good and you can't find the short, you can either take it to a dealer to have them check it out or you can run a separate wire.
To run a new wire from your battery, I recommend the # 10-1-1 to your 7-way along with a 40 amp circuit breaker like part # PK54540. The 12V pin is at the 1 o'clock position.
Product Page this Question was Asked From
Continue Researching
- Shop: Suspension Kit for Tandem-Axle Trailers - 1-3/4" Wide Double Eye Springs - 2-1/4" Links
- Q&A: Troubleshooting Error Codes SH and OL on a Tekonsha Prodigy Brake Controller
- Q&A: Troubleshooting Factory Trailer Wiring for 2003 Ford F250
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Brake Controller Installation: Starting from Scratch
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)

