Recommendation For Tandem Axles Using Andersen Camper Wheel Chock and Leveler

Updated 03/29/2017 | Published 03/28/2017

Question:

I just purchased a set of the Anderson Camper Levelers for my Rockwood fifth wheel camper. I had to cut nearly 4 inches off one of the levelers to fit it between the tires which are by the way 2 1/2 inches apart. My question is, since I cut one leveler off should I cut the other one to match, or leave it full size? Thanks

asked by: Lane K

Expert Reply:

I recommend leaving your second Andersen Camper Wheel Chock and Leveler # AM3604 full size so you will have the most versitility. You can see a similar application in the customer photo found on this page. With that close an application, I recommend starting with your rear tire, then adding the second one in between tires as you start the incline on the ramp. This will give you a little more of an even application.

expert reply by: Jason S