Timbrem Vehicle Suspension Enhancement Recommendation for 1998 Jeep Cherokee with 2 Inch Lift
Updated 02/02/2011 | Published 01/30/2011
Products Featured in This Question
Question:
I have a 1998 Jeep Cherokee 4x4, and was wondering if the Timbrem Vehicle Suspension Enhancements would work on a 2 lifted suspension? Do I need both front and back? Thank you for your time.
asked by: Dirk S
Expert Reply:
The Timbren Heavy-Duty Front or Rear Suspension Enhancement System, # TJRC01, does come with a spacer designed to adjust ride height which will take up some of the space created by the 2 inch lift. However, you will most likely need to use spacers as well. We have 1 inch spacers, # A25723-90AH00.
I would recommend using the front kit, # TJFC01, if you plan on carrying a plow on the front or doing some winching, or if you are looking for more stability at the front of the Jeep. I have included links to the installation details for both sets of Timbren suspension enhancement for reference.
Product Page this Question was Asked From
Timbren Suspension Enhancement System - Rear Axle
- Vehicle Suspension
- Towing/Load Leveling
- Bump Stops
- Suspension Only
- Standard Duty
- Rear Axle Suspension Enhancement
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Q&A: Should I Beef Up the Suspension On a 2006 Nissan Xterra When Towing a Trailer
- Q&A: Timbren or RoadActive Suspension Kit Recommendation for 2012 Nissan Xterra
- Q&A: How Tall are Timbren Springs # TJRC01 for a 2014 Nissan Xterra
- Q&A: Recommended Timbren Springs to Help Bottoming Out in 2007 Nissan Xterra
- Q&A: Rear Helper Springs for a 2014 Nissan Xterra 4x4 Towing a 5,000 Pound Trailer
- Q&A: Recommended Suspension Enhancement System for Occasional Towing with 2010 Xterra 4x4 on Rough Roads
- Q&A: Recommended WD System for a 2008 Nissan Xterra Towing a 17 foot Travel Trailer
- Article: Choosing the Right Suspension Kit for Your Truck and Trailer