Hitch & Brake Controller for 2016 Nissan NV 2500

Updated 02/28/2017 | Published 02/27/2017

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class IV - 2"

(38)

$289.15

Tekonsha Plug-In Wiring Adapter for Electric Brake Controllers - Nissan and Infiniti

(1067)

$16.63

Tekonsha Prodigy P2 Trailer Brake Controller - 1 to 4 Axles - Proportional

(2763)

$124.90

Curt T-Connector Vehicle Wiring Harness with 4-Pole Flat Trailer Connector

(28)

$78.44

Universal Installation Kit for Trailer Brake Controller - 7-Way RV and 4-Way Flat - 10 Gauge Wires

(3400)

$103.72

Question:

Hi Im interested in a trailer class 4 hitch and wiring for my 2016 Nissan NV 2500 I presently have a trailer that has a seven pin on it which I need to make the connection to the new wiring. There are electric brakes on trailer can you provide what materials I would need. thanks.

asked by: Jim S

Expert Reply:

We do offer a 2-inch Class IV hitch for your 2016 Nissan NV 2500, the Curt # C14000. This hitch offers no-drill installation. Installation on an NV 3500 is shown in the linked video.

You will also need a ball mount and hitch ball. The linked article will help you determine which ball mount you need. Use a hitch ball of the size and weight rating required by your trailer.

For a brake controller to activate the trailer's electric brakes I suggest the reliable Prodigy P2 # 90885. If your NV 2500 has a factory 7-way trailer socket you will use the matching quick-connect harness # 3050-P. This harness connects the controller to the under-dash port in your VC 2500. No cutting or splicing is required.

If you do not have any trailer wiring on the vehicle you will need to install a 4-pole harness # C56148 and then convert that to the 7-way format using our kit # ETBC7. This kit also includes all of the items needed to allow installation of the Prodigy controller.