Light Stays On Dimly With Switch In Off Position On New Puma 32 Foot Trailer
Updated 02/22/2017 | Published 02/21/2017
Products Featured in This Question
Question:
This is a new camper. A puma 32 ft. 3 weeks old. We had some rain and I noticed it last night.the light was on high with the switch off. I turned the switch on then off. The light dimmed and stayed on. What is the problem? Thanks.
asked by: John C
Expert Reply:
It sounds like you have a bad switch or a bad ground in the switch. Power is still getting through in the off position. If it is an internal switch, I would check the trailer main ground connection for metal on metal contact. You can use some dielectric grease # 11755 to keep moisture, dirt and debris out of your connections. To test your switch, use an incandescent circuit tester like # PTW2993 to test the power on the cold side of the switch.
Product Page this Question was Asked From
Featured Help Information
Miscellaneous Media
Continue Researching
- Q&A: Trailer Running Lights Do Not Work but Brake Lights and Turn Signals Do Work
- Article: Trailer Wiring Diagrams
- Q&A: How to Test Brake Controller without Trailer Connected
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Q&A: Trailer Turn Signals Both Blink when Just Left Turn Signal is Activated
- Q&A: Trailers Right Tail Light Stays on Even While Unplugged
- Q&A: Troubleshooting Right Side Trailer Lights Not Working, Left Side Working Correctly
- Article: Brake Controller Installation for 2007 (New Body Style) - 2013 GMC Sierra and Chevy Silverado
- Article: Installing an Electric Brake Controller on 2007-2013 GM Full-Size Truck or 2007-Present GM SUV
- Article: Brake Controller Installation: Starting from Scratch
- Article: Troubleshooting 4 and 5-Way Wiring Installations
- Q&A: Troubleshooting A Thomas Payne Recliner That Will Not Recline
- Q&A: Can I Use a 4 Way Vehicle Connector with 7 Way Adapter and the Curt Echo Brake Controller?
- Article: Brake Controller 7- and 4-Way Installation Kit (ETBC7)