Is Distance From Mounting Flange To Front Of Hub Between Idler And Brake Hubs On Axle-Less System
Updated 01/24/2017 | Published 01/23/2017
Question:
If I install idler hubs on this unit, will the hub face distance be 6 inches as is shown in the attached drawings? Also, if I choose at a later date to install brakes, will the hub face distance remain at 6 inches?
asked by: Larry
Expert Reply:
When using an idler hub or a hub and drum with brakes on the Timbren Axle-Less Trailer Suspension System, part # ASR2000S02, the difference in the distance from the bracket to the front face of the hub as shown in the attached drawing would be the same.
The # ASR2000S02is designed for trailers with one or two axles and has a weight capacity of 2,000-lbs. One note: If your trailer does not have a crossmember above the place where you are installing the Timbrens, you may need to reinforce the trailer frame.
Product Page this Question was Asked From
Timbren Axle-Less Trailer Suspension - Standard Duty - No Drop - 4 Bolt Flange - 2,000 lbs
- Trailer Axles
- Rubber Spring Suspension
- Standard Grade
- No Hubs
- 2000 lbs
- Spindles Only
- Universal Fit
- No Drop or Lift
- Timbren
more information >
Featured Help Information
Instructions
Continue Researching
- Shop: Dexstar Conventional Steel Wheel - 15" x 6" Rim - 6 on 5-1/2 - Black Powder Coat
- Shop: Americana Baby Moon Trailer Wheel Center Cap - Chrome-Plated Steel - Qty 1
- Shop: Dexstar Conventional Steel Wheel with Offset - 15" x 6" Rim - 5 on 4-1/2 - Black
- Search Results: 5x45 wheel spacers
- Search Results: st205 75r15
- Search Results: wheel spacers
- Search Results: tire only
- Search Results: 15x6 5x45
- Shop: Americana Pointed Top Baby Moon Trailer Wheel Center Cap - Chrome Plated Steel - Qty 1
- Shop: Phoenix USA Baby Moon Hubcap - 10-1/2" Diameter - Stainless Steel - Qty 1
- Shop: Trailer Hub and Drum Assembly - 3,500-lb Axles - 10" Diameter - 6 on 5-1/2 - Pre-Greased
- Shop: Rambler ST205/75R15 Radial Trailer Tire - Load Range C
- Q&A: Parts Needed to Install a Brake Controller on a 1996 Chevy S-10
- Q&A: Bolt Hole Measurements On BTR E-Z Lube Spindle Brake Flange
- Q&A: Availability of Timbren Axle Less System part # ASR2000S02
- Q&A: Best Replacement for a Dexter 69 - 46 A2 Axle
- Q&A: Recommendation to Upgrade Axle and Hubs on Northern Hardware Trailer
- Q&A: Replacement Axle for a 77" Hub Face
- Q&A: Replacement Hub Assembly for Timbren Axle-Less Suspension System # A20RS545
- Article: How to Measure Your Trailer Wheel Bolt Pattern
- Article: Our Team Picked The Best Camping Gear of the Year - Here Are Their Top Choices
- Article: Trailer Tire Sizing
- Article: Trailer Wiring Diagrams
- Article: Where to Position the Trailer Axle?
- Article: Double-Eye Trailer Suspension System Review
- Article: Wiring Trailer Lights with a 4-Way Plug (It's Easier Than You Think)