Compatibility of the Redline Nut Retainer for the Redine 1 Inch Nut
Updated 01/23/2017 | Published 01/21/2017
Products Featured in This Question
Question:
Will this fit on a 1 1/16inch ez lube axle. The kit RG05-100 says for 1inch axles.
asked by: Ray M
0
Expert Reply:
The Replacement Nut Retainer Jam Nut, # 6-190, is designed to fit the 1 inch Trailer spindle nut that fits the 2,000 lbs to 8,000 lbs axles with E-Z Lube spindles.
The kit you referenced, # RG05-100, will include the same # 6-190 jam nut retainer and # 6-191 jam nut. The actual thread size on the spindle is 1 inch. The jam nut and the retainer measure 1 inch to fit the 1 inch threads on the spindle.
expert reply by:
Jared P
0
Product Page this Question was Asked From
Replacement Nut Retainer for 6-191 Jam Nut
- Accessories and Parts
- Trailer Spindles
- Spindle Nut Retainer
- 1 Inch I.D.
- Dexter
more information >
Continue Researching
- Q&A: Length of Parking Brake Kit Cable
- Q&A: Replacement Hubs and Brakes for 2022 Forest River Flagstaff MAC 425M
- Q&A: Will Dexter Heavy-Duty Suspension Kit Fit Jayco Octane Tandem Axle
- Q&A: Recommended Bearing Kit and Replacement Brake Assemblies for a Dexter 3,500 lbs Axle
- Q&A: Replacement AC for ARC13AACBL2
- Q&A: Recommended Electric Over Hydraulic System for Keystone Montana High Country 5th Wheel Trailer
- Q&A: Will Spindle Nut Kit for EZ Lube Axles Fit 5,100 lb Dexter Axle on 2022 Grand Design Reflection 295R
- Article: Replacing the Bearing, Races and Seals on a Trailer Hub
- Article: Wiring Trailer Lights with a 7-Way Plug (It's Easier Than You Think)
- Article: Trailer Wiring Diagrams
- Article: The Best Trailer Tongue Locks for Preventing Trailer Theft
- Article: Trailer Hitch Installation Tips
- Article: How to Bleed Your Trailer Surge Brakes
- Article: How to Charge a Dump Trailer Battery