Replacement Bolt Thru Fulton Sidewind Swing Up Jack

Updated 12/26/2016 | Published 12/24/2016

Question:

I currently have a Fulton on my boat trailer that has a weld on bracket. The bolt pattern is around 3inch x 5.5. The frame on the trailer is c-Channel 1.75inch x 4. Which Fulton F2 Jack would work? I was looking at the F1413020134. If you dont have one that has the correct bolt pattern. I will probably just use a bolt on.I attached pictures of my existing Fulton Trailer Jacj. Thanks

asked by: Tony L

Expert Reply:

The Fulton Bolt-Thru Swivel Marine Jack - Weld On - Sidewind - 10" Lift - 1,500 lbs, # FXP15W will work for your application. A similar jack like the Fulton XLT Bolt-Thru Swivel Trailer Jack - Weld On - Sidewind - 12" Lift - 1,500 lbs, # F141132 is also an option. The bolt through design on the Fulton Jacks is a universal mount for them, so all their bolt through models are compatible with that welded plate on your trailer.

The Fulton F2 Swing-Up Trailer Jack, Dual 7" Wheels, Sidewind, Bolt-On - 1,600 lbs, # F1413040134, will be the closest bolt on fit for the F2 models. This is a complete bolt on assembly that is not compatible with your current weld on mount. This jack will fit a 3x3 inch tongue or a 3x4 inch tongue frame and is easy to install.

expert reply by: Jason S