Replacement Swivel Collars for the Ends of the Arms on a Falcon 2 Tow Bar

Updated 12/19/2016 | Published 12/18/2016

Products Featured in This Question

Roadmaster Falcon 2 Tow Bar - RV Mount - 2" Hitch - 6,000 lbs

(403)

$850.00

Replacement Driver's Side Inner/Outer Arm Assembly for Roadmaster Falcon 2 Tow Bar

(17)

$247.61

Roadmaster Replacement Inner/Outer Arm for Falcon 2 - Passenger Side

(21)

$260.91

Replacement Inner Arm for Roadmaster Falcon 2 and BlackHawk Tow Bars

(39)

$155.10

Replacement Swivel Collars for Roadmaster Falcon 2 and Falcon 5250 Tow Bars - Qty 2

(50)

$74.04

Question:

Roadmaster Falcon 2 tow bar replacement ends Hi, I have a motorcycle lift that prevents latching the bar up when not towing a vehicle. My improvised alternate way of fastening the bar up failed resulting in dragging the towbar for many miles. The ends were ground down and are now unsafe and need to be replaced. Thanks

asked by: Mike

Expert Reply:

It sounds like you are talking about the swivel collars, # RM-9200-4, on the ends of the arms of the Falcon 2 tow bar # RM-520. These are the parts that attach to the base plates.

Considering what happened with your tow bar I would give it a thorough inspection because there could be internal damage that isn't obvious. Make sure the arms go in an out and if they do not then they could be bent. The replacement inner arm is # C000172. The replacement inner and outer, passenger side, is # 910021-80, and the driver's side is # 910021-70.

expert reply by: Michael H