Center to Center Distance Between Threaded Parts of U-Bolt 175643
Updated 12/06/2016 | Published 12/05/2016
Question:
Can you tell me the distance from center to center of the threaded ends of Replacement U-Bolt with Nuts for 1-3/4inch Round Trailer Axles - 3/8inch Diameter, Code: 175643? I need some u-bolts that able to fit the threaded ends through existing holes that are spaced 2inch from center to center.
asked by: John A
0
Expert Reply:
For u-bolt # 175643 it is 2-1/8 inches on center. All of the 1-3/4 inch, 3/8 suspension u-bolts will be the same. Since it is only 1/8 of an inch off you can probably bend them a little to fit your application.
expert reply by:
Michael H
0
Product Page this Question was Asked From
Replacement U-Bolt with Nuts for 1-3/4" Round Trailer Axles - 3/8" Diameter
- Trailer Suspension Parts
- U-Bolts
- Camper
- Car Hauler
- Utility Trailer
- 2000 lbs
- Round Axle - 1-3/4 Inch
- 3/8 Inch Diameter
- 4-1/4 Inch Long
- Redline
more information >
Continue Researching
- Q&A: Does Ventline E-Z Lift Ventadome Trailer Roof Vent # V3092-603-00 Have Ceiling Garnish
- Q&A: Will Replacement Fabric for etrailer Powered RV Awning Work With Solera Or Dometic Awnings?
- Q&A: Can Camco Water Heater Element be Used in Suburban Water Heater
- Q&A: Options for Adding Electric Brakes to Trailer Axle without Brake Mounting Flanges
- Article: Parts Needed to Add Electric Drum Brakes to a Trailer
- Q&A: Replacement Axle for 5 x 10 Utility Trailer
- Q&A: Replacement Leaf Springs and MORryde X-Factor Crossmember for 2021 Grand Design Imagine 2400BH
- Article: Slipper Spring Trailer Suspension System Review
- Q&A: What Are The Longest 3,500 lb Axle U-Bolts Available?
- Article: Most Popular Wheel Bearings
- Article: How to Tell the Weight Rating of a Trailer Axle
- Article: What Exactly is Tongue Weight?
- Article: Trailer Wiring Diagrams
- Article: Is It Illegal to Leave My Hitch on My Truck?