How Does ZCI Trailer Wiring Harness Wire to 2016 Mercedes-Benz GLC300

Published 09/29/2016

Products Featured in This Question

Curt Trailer Hitch Receiver - Custom Fit - Class III - 2"

(65)

$216.07

ZCI Circuit Protected Vehicle Wiring Harness w/ 4-Pole Flat Trailer Connector and Installation Kit

(522)

$192.61

Question:

My customer bought the module and hitch from you for his 2016 mercedes glc 300 and im trying to wire this module into his truck . The brake / turn signal is a one wire input , and this is what i used for the left and right side . Running light has its own and the red brake pickup is not used . after programming is done and vehicle is started i loose the left and right signals . This truck used LED and low voltage systems . Do i need to go and run off the third brake bulb ???

asked by: Ricks A

Expert Reply:

Since the vehicle has a multi-plexed wiring setup that has the running light on it's own circuit this is how the wires of the # 119250KIT should get ran on the vehicle.

Yellow of harness to vehicle Left Turn wire, Green of vehicle to vehicle Right turn wire & Red to vehicle Brake/Tail wire. The brown wire would not be used.

expert reply by: Jameson C