What Size Pipe are the Ranch Hitch Safety Chains # AM3109 Designed to Go Around  

Although the laws regarding towing safety can vary from state to state, using safety chains is a practice I would consider mandatory.

As long as the outer diameter of the gooseneck hitch tube you have is 4-1/2 inches the #AM3109 would fit as that's the size it was designed to fit.

There are two recommended ways to install the Andersen Ranch Hitch part #AM3100 that you referenced and since you don't have access to a welder easily your best option will be to attach the adapter to the pin box using the included Grade 8…

Since the Ranch Hitch adapter #AM3100 is rated for 24,000 pounds gross trailer weight and 6,000 pounds pin weight, no additional reinforcement is required for use. Generally though when a gooseneck hitch is attached using a fabricated installation…

There are many options for attaching the breakaway cable from the Tow Ready Trailer Break Away Kit, item #50-85-315, to your vehicle. You could attach to a tie down point in the bed of your truck or you could use stake pocket tie down and attach the…

In order to determine the torque rating for the lug nuts on your trailer you will need to know check out the chart I attached that shows all of the torque specs for all the trailer lugs available based on stud size, wheel material and wheel size.

Trailer wheel bearings are specific to the spindle that is installed on the axle that is on your trailer. You will need to safely support the trailer, remove the wheel and tire, remove the grease cap, remove the cotter pin and washer that secures the…

To determine the size of the hub assembly you need to purchase you have to determine which bearings are in the old assembly. If the old assembly has L44649 inner bearings, you would use the hub you chose #8-258-5UC1. If the inner bearings are marked…

To find the load capacity for your axle you should look on the trailer VIN plate or sticker that lists the VIN number. The weight rating of the axle should be listed on that same plate or sticker. Also, the axle could have a tag or plate on it that…

The difference between an load range C and load range D tire in the same size is the capacity and psi rating. The two tires will still have the same dimensions and fit on the same wheel. The D rated tire has a higher capacity. For a ST175/80D13 like…

To determine the size of the brake assemblies you need you have to measure the depth and width of the hub drum on the axle like what you see in the picture I attached. The most common size is 2-1/4 inch wide like the #T4071600-500 that you…

The 5.30-12 tires, being wider, are going to make more contact with the road. This means that the noise, and heat build up will be higher than a 4.80-12 tire but the rolling resistance will actually be less because the tire is larger diameter. The…